Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            AEMC 3900: (1 year) CAL VER /5520
DATE:                  18-Feb-98
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.2 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       7
NUMBER OF LINES:       79
CONFIGURATION:         Fluke 5520A
STANDARD:              Fluke 5500A/COIL
=============================================================================
#
# Compatibility:
#  5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5520A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  STD          Fluke 5500A/COIL
  1.002  DISP         {Procedure not formally tested with UUT.}
  1.002  DISP         {See procedure README file.}
  1.003  ASK-   R                    P                            F        V
  1.004  ASK+           K                              X
  1.005  HEAD         PRELIMINARY INSTRUCTIONS
  1.006  DISP         Connect UUT to AC power and turn unit ON.
  1.006  DISP
  1.006  DISP         Warm-up time: 30min - REQUIRED
  1.006  DISP         Temperature: 23 +/-2 degC
  1.006  DISP         Humidity: 55 +/-10%
  1.007  DISP         [32]                WARNING
  1.007  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.007  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.007  DISP         personnel fail to observe safety precautions.
  1.008  DISP         Connect the 5520A to the UUT as follows:
  1.008  DISP         [32] 5520A NORMAL HI to UUT V Input
  1.008  DISP         [32] 5520A NORMAL LO to UUT N Input(neutral)
  1.009  HEAD         {VOLTAGE}
  1.010  DISP         Select Volts.
  1.010  DISP         Select the 200V Range.
  1.011  HEAD         VOLTAGE : {200V Range}
  1.012  5520   200   180.0V         0.4/          60H            SI       2W
  2.001  5520   200   180.0V         0.4/ 0.1U     500H           SI       2W
  3.001  HEAD         VOLTAGE : {600V Range}
  3.002  DISP         Select the 600V Range.
  3.003  5520   600   580.0V         0.4/          60H            SI       2W
  4.001  HEAD         {CURRENT}
  4.002  DISP         Leave voltage connections in place!
  4.003  DISP         Connect the standard 1000:1 clamp-on current probe
  4.003  DISP         to the 3900 current input jacks.
  4.003  DISP
  4.003  DISP         Connect a Fluke 5520A/COIL to the 5520A 20A and AUX LO.
  4.004  DISP         Clamp the current clamp around the 50-turn coil.
  4.005  DISP         Select Amps.
  4.005  DISP         Select the 200A Range.
  4.006  5520   1000  180A           1/ 3U         60H            SI HC    LT5
  5.001  DISP         Select the 2000A Range.
  5.002  5520   1000  500A           1/ 3U         60H            SI HC    LT5
  6.001  HEAD         {POWER FACTOR TESTS}
  6.002  DISP         Select COS.
  6.002  DISP         Select the 2000A Range.
  6.003  M5520        200V           -90deg                       SI
  6.004  5520         400A                         60H            SI HC S  LT5
  6.005  ACC          000pf          0.086U
  6.006  MEMI         Enter the UUT Power Factor reading.
  6.007  MEME
  6.008  MEMC         pf             11U
  7.001  END